LFT-G modifié nylon66 PA66 remplissant de longs composés de fibre de verre durcissant la qualité de résistance pour les appareils électroniques

Informations PA66-LGF

Le PA66 est l'un des produits de la série polyester les plus produits et les plus utilisés. Il a une taille de grain élevée, d'excellentes propriétés de traction, des propriétés de flexion, une résistance à la traction et d'autres propriétés mécaniques du matériau, ainsi que ses excellentes caractéristiques de température ultra-basse et ses propriétés chimiques organiques. Il s'agit d'une classe de produits en caoutchouc avec une large gamme d'applications, des caractéristiques stables, de bonnes propriétés mécaniques, une isolation de haute qualité, une faible densité, un traitement et un moulage faciles, une auto-extinction et une bonne résistance à l'usure.

The most important hazard of proportional limits to raw materials is mechanical properties. The material mechanical properties of modified PA66 are also related to the composition of glass fibers. The tensile strength, bending strength and impact compression strength of PA66 increase with the glass fiber composition after the addition of PA66 chemical fibers. The tensile and flexural strengths of the managed system increased linearly, but the glass fiber composition was 30%. The trend of increasing tensile and flexural strengths showed some improvement. The results show that PA66 can produce a reasonable page layer, which can reasonably transfer the ground stress between the matrix and page, and thus improve the compressive strength of the matrix.

PA66-LGF TDS

The datasheet was tested by Xiamen LFT, for your reference only.

PA66-LGF Application

Suitable for many fileds, other application you can ask for our technical advice.

Details

Xiamen LFT composite plastic Co., Ltd

Xiamen LFT composite plastic Co., Ltd. is a brand-name company that focuses on LFT&LFRT. Long Glass Fiber Series (LGF) & Long Carbon Fiber Series (LCF). The company's thermoplastic LFT can be used for LFT-G injection molding and extrusion, and can also be used for LFT-D molding. It can be produced according to customer requirements: 5~25mm in length. The company's long-fiber continuous infiltration reinforced thermoplastics have passed ISO9001 &16949 system certification, and the products have obtained lots of national trademarks and patents.

We will offer you:

1. LFT&LFRT material technical parameters and leading edge design

2. Mold front design and recommendations

3. Provide technical support such as injection molding and extrusion molding.